Farming Simulator 25 mods
76,344 results- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro
SlurryPipeSystem v1.0.1.2
v1.0.1.2: Added Front-mount fill arm system (Claas Saddle Trac pack) Front-mount pass-through pump — a capacity-0 front unit (HVP) that fills a hose-connected receiver tanker. Works on any tractor, not just the Xerion: SPS injects Giants connection hoses (plain-type TOOL_CONNECTOR_TOP_RIGHT) into the vehicles’ own hose systems at registration time, so vanilla treats them as native hoses. The Xerion’s own specType hose circuit is detected and left alone — no duplicate hoses. Pass-through pump cascade — the front mount resolves two tank-side outlets in strict priority every tick: connected pipe couplings with the valve open first, then the hose-bridged rear receiver. Filling sends liquid to the first target with free capacity; unloading draws from the first with content — so a coupler tanker fills first, overflow goes to the rear tanker, and it switches back automatically as levels change. Full mirror for unloading. Water is a valid infinite fill source and refused as an unload destination. New config schema — on the front unit; on receiver tankers; config-gated hoses and static pipes via cylinderedConfigIndex; objectChange visibility on connect/disconnect transitions with optional initialState=”inactive”. Standard receiver mount node name: slurryPipe. Front / rear tank combos (“FlowControl”) Any front tank pairs automatically with any rear sprayer on the same tractor sharing a fill type — no per-pair config, no keybind, only the pipe-connected vehicle needs an SPS block. One connection fills both (split proportional to free capacity — both reach full together) and drains both (proportional to level — empty only when both are). Automatic balancer modelled on the real Amazone FT-P: rear held at 30% from the front tank at 200 l/min, topped up to 40%, so the front always empties first and front axle load is preserved. Optional tuning via Sprayer buying station Placeables can now sell liquid fertiliser / herbicide straight into the sprayer pipe system. A part-full sprayer auto-switches the station to its held liquid on connect and locks the type switch while connected. WATER is always refused from the sprayer cycle. Slurry and sprayer buying stations are mutually exclusive on one placeable (warned in the log). lets script mods add their own liquid categories (e.g. Soil & Fertilizer). Shift + activate reverses the type-switch cycle on both slurry and sprayer stations. Store info box — per-tank rows Standing at a fertiliser store now shows one row per physical tank — T-1, T-2 — with each tank’s held liquid and litres, matching the N-couplers = N-liquids rule. New vehicle support Rau Spridoport rear sprayer + Rau front tanks (Xylon and GTA) from the Fendt FarmCon pack — working FlowControl combos out of the box. PlanET BGA Modular (community contribution — thanks dev-mich, PR #23): Guelle and Gaerreste stores wired into SPS via config injection, with per-coupler fill types (LIQUIDMANURE / DIGESTATE). Vervaet Hydro Trike XL (selfPropelledManureBarrel) now fully supported — see Fixed. Compatibility & safeguards Drive-input watchdog — some mod combinations (seen with Courseplay) could leave a vehicle unable to drive after selecting implements. SPS now monitors the drive axes once a second, logs a full diagnostic scoreboard when the broken state persists, and self-heals the action bindings (up to 3 attempts per vehicle entry). New vehicleRole=”slurry|fertiliser” vehicle attribute for edge cases where vanilla’s sprayer classification gets a machine wrong. New debug channel SPSM_Sprayers.FrontTank ([SPS FT-BAL] combo/balancer trace). All channels still ship off. Translations sps_infoTankEmpty (“Empty”) and warning_spsSlurryThickeningWater added to all five languages (EN / DE / FR / IT / NL). Fixed Slurry stores could jam permanently and water dilution did nothing. The liquid-first draw bias was applied unconditionally and the maths meant dry matter was never removed at all — pumping thinned nothing and added water came straight back out. Now: solids leave with every draw in honest proportion; the concentrating draw only applies to settled stores (a fresh or fully mixed store drains completely to zero, so mixing before pumping has a real purpose); an empty-store dead band stops “add water” advice appearing on empty stores; and existing savegames with inflated solids values are repaired automatically on first load (logged per store). Thickness warnings now name the actual remedy — four distinct states (thickening, thickening + add water, needs mixing, too thick) instead of always advising mixing. DE/FR/IT “too thick” strings corrected (they wrongly advised agitation for a state where agitation cannot help). Conduit HUD fixed: thickness percentage always read 0%, and the needs-mixing state had no display branch. Vervaet Hydro Trike XL showed no pump gauge. Vanilla misclassified it as a fertiliser sprayer because its sprayer spec pointed at the diesel tank; SPS now uses its own registration to decide the exemption (all five gate sites), the config’s fillUnitIndex was corrected, and the tanker override gate covers selfPropelledManureBarrel. Pipe effects no longer require a smoke node — every effect gate now needs only the main effect node; the smoke layer is built only when a smoke node exists. Spreader valve keybind no longer appears on front-mount units (they are manureBarrel-typed but have no spreader). Equalisation no longer fights the front-mount pump (neutral gate while the front pump is driving a transfer). Dynamic store per-tank rows went stale after buying at the store’s own trigger — totals updated but T-rows didn’t until the next pipe session. A one-second server-side reconcile now credits external fills within a second, SP and dedicated servers alike. “Missing ‘sps_infoTankEmpty’” shown on empty tank rows — entry now shipped in every language. Changed Documentation: main README feature list updated (front mounts, FlowControl combos); Fert/Herbicide Sprayer guide gains §12 (front/rear combos, pairing rules, balancer tuning, debug channel); Placeables guide §4 now documents the pipeCoupling#fillType restriction attribute (was parser-supported but undocumented — thanks dev-mich for the catch). Multiplayer audit completed against vanilla network sources: all 29 SPS event classes verified structurally correct, server-authoritative fill mutations confirmed, and join-in-progress state dump coverage verified. Known limitations A buying-station fill lands in the connected vehicle’s own tank only; with a front/rear combo attached, the balancer redistributes rearward automatically afterwards. Agrio Gigant and Agrio Mamut XL manifest entries are prepared but commented out pending the mods’ vehicle files. Covers 25–31 July 2026 · V1.0.0.10 → 1.0.1.1 Each entry states what was wrong, why it was wrong, and what changed. Line references are against the V1.0.1.1 tag unless noted. New features Slurry separator (Börger 125 bunker separator) — new screw-press placeable (manureHeapSeparator type): pulls slurry in through one coupler, presses the dry matter onto its own manure bunker, returns the thinner liquid fraction through the other coupler. Walk-up start/stop and 5-step screw tightness control; auto-halts on exhausted dry matter or a full bunker and resumes on its own; optional running cost per hour. Fully server-authoritative, MP-synced, join-in-progress safe, saved per game. Third-party placeables can configure their own machine via . Buying station support — FS25_BuyableManureAndOther’s liquid manure station registers as a paid, infinite pipe-only SPS source with a walk-up switch between its sold liquids (plus SPS-extra types such as water). Charges through the station’s own pricing; MP-synced and JIP-safe. Gravity head equalisation — new optional headHeightNodeName on vehicle and store couplings. Levels equalise by gravity between connected vessels, gated on the pipe run’s declared high point, so slurry only flows downhill when it genuinely can. Couplings without the attribute behave exactly as before. Lid-linked deployable couplers — new deployAnimatedObjectSaveId on store couplings drives the placeable’s own vanilla animatedObjects lid: deploy opens it, connecting requires it fully open, and the lid’s walk-up trigger locks while a pipe is live. Shared lids across several couplers supported via one shared animated object. Sprayer store fill-type control — placeable sprayer couplings can now declare their own fill type and capacity (#fillType + #capacity), or act as dynamic lock-until-empty compartments (#fillTypes / #fillTypeCategories, including fillTypes=”ANY” which accepts whatever the connected sprayer holds — script-mod liquids included). Compartment state saves, syncs in MP and survives JIP. Per-config coupler animations — vehicles and placeables (slurry and sprayer) can ship their own block inside the embedded config; local ids override the shared library. Pipes rest on real surfaces — laid chains and connection pipes now settle onto concrete pads, building floors, bridge decks and roads (per-bone raycast), not just the terrain, across all three pipe visual systems. Soil & Fertilizer compatibility — all 12 FS25_SoilFertilizer custom liquid IBC tanks are recognised; SPS spawns the correctly branded IBC for the connected sprayer’s liquid. IBC spawn control — optional IBCspawnPoint child node on a sprayer coupler dictates the hold-R spawned IBC’s position and heading; the Add IBC prompt is suppressed while the sprayer is empty. Embedded crust visuals — the foliage/plane block now works on placeables registered via the embedded block (previously bundled-config only). Per-player settings — the pipe colour picker and the entire spreader HUD section have moved to the General settings page, so every player in multiplayer (not just the host/admin) can use them. Each player’s choices — including the dragged HUD position and scale — now persist in their own local user file across sessions and servers. Multiplayer gameplay settings sync — the gameplay rows (Slurry Realism, Thickness Flow, Blockages, Length Falloff, Shear Bolt, IBC Persistence) are now server- authoritative: admin changes apply on the server, broadcast to every client, and reach late joiners in the join dump. The shear bolt master switch now actually disables bolt wear (it was previously unconnected). Fixes valveType=”NONE” store couplers no longer show a phantom “Open valve” prompt anywhere on the run — walk-up interaction is connect/disconnect only, and the far end is treated as free-flowing. Savegame reload no longer duplicates or loops back coupler bez pipes; a load-side sanitizer heals already-corrupted saves. Multi-type husbandry storages (straw + slurry) no longer risk draining STRAW or converting deposits into the wrong type — transfers are gated on a pumpable-liquid allowlist. Digestate deposited into a slurry-holding tank now merges into the held content instead of creating a separate pool. Pressure direction fix: a tank charged to vacuum can no longer discharge at full rate when flipped to pressure (sign-aware flow scalar), with a vacuum-seal gravity guard and dead-band equalisation through the pressure transit window. Coupler animations no longer fail for players whose session registration order latched an empty animation library — the library resolves regardless of load order. Chain terminus bonds to stores and free-standing termini now persist across savegames. Slurry tank extension flags are cleared on LIQUIDMANURE/DIGESTATE storages so extensions behave as independent SPS stores. Pipes no longer bounce or launch into the air while being laid (self-collision feedback removed by stripping floor collision bits at load). Laying new pipes near existing connected chains works again (in-service anchored termini and mid-chain joints excluded as connect candidates). Separator solids no longer vanish in sub-litre pushes; the manure heap fills correctly, and store settle/crust scales down as dry matter is withdrawn. Release log hygiene: the separator debug channel no longer ships enabled; previously ungated multiplayer receive prints (chain state/request/connect, docking station, chain lock) and the sprayer cab action-strip prints are now behind debug flags. Localisation: German, French, Italian and Dutch brought to full English parity — 15 missing separator and buying-station entries added, and 3 previously untranslated agitator PTO strings translated. Version 1.0.0.8 Fixed issues with multiplayer, pipes and valves plus sync problems Few other tweaks Version 1.0.0.5 Changes made for bug fixes and updates. A realistic slurry pipeline system for Farming Simulator 25. The FS25 Slurry Pipe System (SPS) replaces the simplified vanilla mechanics of the game—simply drive up to a trigger and fill—with a fully interactive pipeline system. Physically connect filling arms or pipes, operate a PTO-driven pump, build up pressure, control the flow direction, and watch the slurry actually move through a connected pipeline system. The slurry itself behaves realistically: it becomes more viscous over time, forms crusts if not regularly stirred, and can clog pipes or distributors if neglected.
Brush Cutter Rust Edition v 1.6
Price: 80$ Working width: 0.5 m Color configuration Can be strapped to trailers In mower category 2 versions one that drops grass swath and another version that does not drop grass swath Added rust for wear shader Version 1.6: * Updated the ModDesc
Claas Trion 720/750 Speedy v 1.9
CLAAS TRION 720-750 Category: Harvesters Price: $357500 – $391500 Power: 367 hp – 435 hp Max speed: 30 kph Capacity: 120000 200000 CORIO 875 FC Category: Corn Headers Price: $63500 Working width: 6 Working speed: 20 kph Optimized the file Increased working speed Larger capacity Faster empty speed Configs are free Version 1.9: * Updated the ModDesc
New Holland CR11 v 3.1
Includes the Gold Edition CR11 Includes a concept design config Includes the CaseIH design config Includes the macdon header with all matching configs as well. Includes 250000,500000,1000000,1500000,2000000,2500000,3000000,3500000 capacity config Version 3.1: * Updated the ModDesc
Diamant 8 Rust Edition v 1.5
Category: Corn Headers Price: $63500 Working width: 6 Working speed: 20 kph Increased working speed Added rust for wear shader Version 1.5: * Updated the ModDesc
Claas Rollant 455 Uniwrap Speedy v 1.9
Category: Roundbalers Price: $112500 Required power: 145 hp Working speed: 17 kph Bale dimensions: 125cm Wrapped bale dimensions: 125cm Increased wrapping speed Optimized the file Version 1.9: * Updated the ModDesc
CNH Square Balers Pack Rust Edition v 1.5
Category: Squarebalers Price: $167500 Required power: 230 hp Working speed: 17 kph Bale dimensions: 180cm – 240cm Added rust for wear shader Free configs Added balers to baling contracts Version 1.5: * Updated the ModDesc
Horsch Cura 24 ST Rust Edition v 1.5
Category: Weeders Price: $85000 Required power: 200 hp Working width: 24.5m Working speed: 24 kph Faster working speed Added rust for wear shader Added to weeding contracts Version 1.5: * Updated the ModDesc
Slurry Pipe System v 1.0.1.2
Realistic physical slurry pipe system for Farming Simulator 2025. Replaces vanilla “drive into a trigger and fill” mechanics with a tactile system where you physically connect tanker fill arms or pipe chains, run a PTO driven pump, build pressure, control flow direction, and watch slurry move through real plumbing with a slurry that actually thickens, crusts and blocks if you neglect it. Added Front-mount fill arm system (Claas Saddle Trac pack) Front-mount pass-through pump — a capacity-0 front unit (HVP) that fills a hose-connected receiver tanker. Works on any tractor, not just the Xerion: SPS injects Giants connection hoses (plain-type TOOL_CONNECTOR_TOP_RIGHT) into the vehicles’ own hose systems at registration time, so vanilla treats them as native hoses. The Xerion’s own specType hose circuit is detected and left alone — no duplicate hoses. Pass-through pump cascade — the front mount resolves two tank-side outlets in strict priority every tick: connected pipe couplings with the valve open first, then the hose-bridged rear receiver. Filling sends liquid to the first target with free capacity; unloading draws from the first with content — so a coupler tanker fills first, overflow goes to the rear tanker, and it switches back automatically as levels change. Full mirror for unloading. Water is a valid infinite fill source and refused as an unload destination. New config schema — on the front unit; + on receiver tankers; config-gated hoses and static pipes via cylinderedConfigIndex; objectChange visibility on connect/disconnect transitions with optional initialState=”inactive”. Standard receiver mount node name: slurryPipe. Front / rear tank combos (“FlowControl”) Any front tank pairs automatically with any rear sprayer on the same tractor sharing a fill type — no per-pair config, no keybind, only the pipe-connected vehicle needs an SPS block. One connection fills both (split proportional to free capacity — both reach full together) and drains both (proportional to level — empty only when both are). Automatic balancer modelled on the real Amazone FT-P: rear held at 30% from the front tank at 200 l/min, topped up to 40%, so the front always empties first and front axle load is preserved. Optional tuning via . Sprayer buying station Placeables can now sell liquid fertiliser / herbicide straight into the sprayer pipe system. A part-full sprayer auto-switches the station to its held liquid on connect and locks the type switch while connected. WATER is always refused from the sprayer cycle. Slurry and sprayer buying stations are mutually exclusive on one placeable (warned in the log). lets script mods add their own liquid categories (e.g. Soil & Fertilizer). Shift + activate reverses the type-switch cycle on both slurry and sprayer stations. Store info box — per-tank rows Standing at a fertiliser store now shows one row per physical tank — T-1, T-2 — with each tank’s held liquid and litres, matching the N-couplers = N-liquids rule. New vehicle support Rau Spridoport rear sprayer + Rau front tanks (Xylon and GTA) from the Fendt FarmCon pack — working FlowControl combos out of the box. PlanET BGA Modular (community contribution — thanks dev-mich, PR #23): Guelle and Gaerreste stores wired into SPS via config injection, with per-coupler fill types (LIQUIDMANURE / DIGESTATE). Vervaet Hydro Trike XL (selfPropelledManureBarrel) now fully supported — see Fixed. Compatibility & safeguards Drive-input watchdog — some mod combinations (seen with Courseplay) could leave a vehicle unable to drive after selecting implements. SPS now monitors the drive axes once a second, logs a full diagnostic scoreboard when the broken state persists, and self-heals the action bindings (up to 3 attempts per vehicle entry). New vehicleRole=”slurry|fertiliser” vehicle attribute for edge cases where vanilla’s sprayer classification gets a machine wrong. New debug channel SPSM_Sprayers.FrontTank ([SPS FT-BAL] combo/balancer trace). All channels still ship off. Translations sps_infoTankEmpty (“Empty”) and warning_spsSlurryThickeningWater added to all five languages (EN / DE / FR / IT / NL). Fixed Slurry stores could jam permanently and water dilution did nothing. The liquid-first draw bias was applied unconditionally and the maths meant dry matter was never removed at all — pumping thinned nothing and added water came straight back out. Now: solids leave with every draw in honest proportion; the concentrating draw only applies to settled stores (a fresh or fully mixed store drains completely to zero, so mixing before pumping has a real purpose); an empty-store dead band stops “add water” advice appearing on empty stores; and existing savegames with inflated solids values are repaired automatically on first load (logged per store). Thickness warnings now name the actual remedy — four distinct states (thickening, thickening + add water, needs mixing, too thick) instead of always advising mixing. DE/FR/IT “too thick” strings corrected (they wrongly advised agitation for a state where agitation cannot help). Conduit HUD fixed: thickness percentage always read 0%, and the needs-mixing state had no display branch. Vervaet Hydro Trike XL showed no pump gauge. Vanilla misclassified it as a fertiliser sprayer because its sprayer spec pointed at the diesel tank; SPS now uses its own registration to decide the exemption (all five gate sites), the config’s fillUnitIndex was corrected, and the tanker override gate covers selfPropelledManureBarrel. Pipe effects no longer require a smoke node — every effect gate now needs only the main effect node; the smoke layer is built only when a smoke node exists. Spreader valve keybind no longer appears on front-mount units (they are manureBarrel-typed but have no spreader). Equalisation no longer fights the front-mount pump (neutral gate while the front pump is driving a transfer). Dynamic store per-tank rows went stale after buying at the store’s own trigger — totals updated but T-rows didn’t until the next pipe session. A one-second server-side reconcile now credits external fills within a second, SP and dedicated servers alike. “Missing ‘sps_infoTankEmpty’” shown on empty tank rows — entry now shipped in every language. Changed Documentation: main README feature list updated (front mounts, FlowControl combos); Fert/Herbicide Sprayer guide gains §12 (front/rear combos, pairing rules, balancer tuning, debug channel); Placeables guide §4 now documents the pipeCoupling#fillType restriction attribute (was parser-supported but undocumented — thanks dev-mich for the catch). Multiplayer audit completed against vanilla network sources: all 29 SPS event classes verified structurally correct, server-authoritative fill mutations confirmed, and join-in-progress state dump coverage verified.
Rau/Lizard Sprayers Pack v 1.0
Sprayer Pack for the Mercedes-Benz MB-trac Series by Bremi456 Rau Mounted Tank: Base Price: €4,500 Capacity: 3,000 liters Rau Front Sprayer: Base Price: €450 Working Width: 3.5 meters Lizard Front Tank: Base Price: €300 Capacity: 400 liters Configurations for All Equipment: Mounting coupling type Weight (for heavier implements) Terminal How do I attach the equipment to my MB-trac? Mounted Tank: Configure the “Subframe” on the MB-trac and select the appropriate MB-trac mounting coupling type on the tank. Front Tank: NO front hydraulics required. The tank is attached to the drawbar. Front Sprayer: Configure the 3-point hitch, then attach the sprayer to the FRONT with the tank mounted on top, OR use the “Rau Trailed Tank” from the ModHub Required / Optional Mods: Mercedes-Benz MB-trac Series – by Bremi456 (Required) Rau 2700L Trailed Tank – by Kamilos0397 (Optional)
MP Statistics v 1.0
MP Statistics adds a dedicated multiplayer statistics screen for Farming Simulator 25 servers. It keeps the server authoritative while giving players a clean, standalone place to review synced player and farm progress. What it does: Shows separate Player Stats and Farm Stats pages with SP-style statistic rows, session values, and total values. Mirrors farm statistics from the server save and records active player time plus same-farm activity deltas. Syncs snapshots from the server to clients for MP-safe, deterministic display without client-authoritative stat changes. How to use: Open the stats screen in game with F9 or Right Ctrl + M. Use the Player Stats and Farm Stats tabs to switch between views. The screen can also be opened with the gsMPStatsOpen console command. Use gsMPStatsInputStatus for input/action diagnostic information.
Kenworth T600 Farm Truck v 1.2
– Capacity: 22 m³ – Speed 120 km/h – Selectable wheels – Selectable fender – Selectable tag axle – Selectable license plates – Selectable air horn – Selectable color (base, bumper, rim, body) – Animated dashboard, pedals, gear shifter, driveshaft and turn signal switches. – Passenger support Version 1.2: * Added animation for the tag axle air bags * Added animation for the gear shifter and the driver’s hands * Added animation for steering mechanism components * Added the option to paint the bumper and side fairings a different color * Added the ability to install an air horn * Interior improved * Sounds improved * Jake brake added (IC required for activation)
Visual Mud Tracks v 1.3.7.1
Visual Mud Tracks expands Farming Simulator 25 with a comprehensive simulation of lanes, soil moisture, tire behavior, compaction, fruit destruction, root damage and bogging. This means that vehicles react much more realistically to dry, moist and water-saturated soils. The mod is designed for single player and multiplayer and can work with the **Realistic Water & Soil Management System**. Soil moisture, load capacity and waterlogging not only influence the display, but also tire contamination, sinking, slippage, driving resistance and plant damage. Physical lanes and terrain grooves Tires can permanently lower the terrain and create real grooves in the terrain heightmap. The depth and width of the tracks are calculated individually for each wheel. To be taken into account: Vehicle weight actual wheel load Tire width and tire radius Tire pressure Soil moisture Soil saturation Carrying capacity Speed Wheel slip Cornering Number of previous crossings Trailers, levels and attachments Left and right bike lanes remain separate. The center of the vehicle is not lowered unnecessarily. The grooves have a narrow, steep cross section so that the edge areas do not sink over a large area. Existing tracks can be deepened by further difficult crossings. A maximum depth protects the terrain from extreme deformation. The groove is created directly at the actual wheel contact. There is no delayed post-processing behind the vehicle. Steered, mirror mounted and differently aligned wheels are taken into account. Restoration through tillage Physical lanes can be removed again through appropriate tillage. The following are supported, among others: Plows Cultivator Disc harrows Subsoiler Mulcher Reels Seeders Direct seeding machines Planters The terrain is only reset within the actual work area being worked on. Pending trace calculations and saved visual traces are also removed there. Safe Terrain Journal The mod uses separate savegame files: `visualMudTracksTerrainBackup.xml` `visualMudTracksActiveRuts.xml` `visualMudTracksState.xml` The original terrain height of a cell is saved during the first intervention and is not later overwritten by further passes. Active grooves and recovery information are managed separately. This allows tracks to be reset in a more controlled manner. Interrupted restores can be resumed the next time you start the game. Important note for updates: Before switching from an older version, existing lanes with the old version still installed should be removed using tillage equipment and the score saved. Grooves that have already been permanently written into the terrain height map may otherwise remain. Visible and physical sinking Tires visibly and physically sink on soft and wet surfaces. The sinking is implemented via the effective wheel physics radius. This means that the tires, suspension and ground contact react together. The sinking occurs progressively and not suddenly. On solid ground, the wheel lifts itself out of the ground in a controlled manner. The sinking depth depends on: Soil moisture Saturation Carrying capacity Wheel load Tire width Tire pressure Speed Slip existing track depth Wide tires distribute the load better. Narrow, heavily loaded tires cut deeper. Tire pressure system The tire pressure can be changed while driving. The value is saved for each wheel and synchronized in multiplayer. Low tire pressure: increases the contact area Improves grip on soft ground reduces cutting can make it easier to get out of soft tracks High tire pressure: reduces the contact area increases cutting increases the risk of getting stuck on wet ground may be cheaper on solid ground A compact HUD shows the current pressure in bar and evaluates it in color. Soil moisture HUD and RWSM connection The Soil Moisture HUD shows the current RWSM topsoil value in percent. The display uses the same soil moisture value as the RWSM field info. Values above 100 percent can represent severe waterlogging or waterlogging. RWSM soil moisture affects: Sludge content Tire contamination Particle effects Carrying capacity Sinking depth Tire grip Wheel slip Groove depth Danger of getting stuck Fruit and root damage Increased soil moisture caused by irrigation can also change the soil physics. Tire dirt and mudThe amount of mud is stored individually for each tire. A tire remains dirty after leaving the field and cleans itself depending on the surface. Asphalt cleans quickly Gravel cleans slower Clean dirt roads only slightly high speed throws more mud out of the tread Rain also washes off the tires a light film of dirt may remain The particle effects distinguish between dry earth and wet mud. Included are: fine dry soil particles medium dry soil particles fine wet splashes medium mud particles rare heavy mud lumps The amount of particles depends on wheel rotation, slip, tire width, radius, moisture, sink factor and load capacity. Particles are only generated when there is suitable ground contact. Progressive stuck physics On heavily waterlogged and less stable ground, a vehicle can progressively become stuck. Continuous slippage causes driven wheels to dig in further. At the same time, the transferable grip decreases and the driving resistance increases. To be taken into account: Soil moisture and saturation Carrying capacity Wheel load Tire pressure Slip Speed Engine utilization Engine speed Tensile load Working resistance Duration of exposure Plows, cultivators, disc harrows, subsoilers, seed drills, power harrows and rollers produce different pulling resistances. Working width and working depth influence the power requirement. In extreme conditions, propulsion can be almost completely lost. Lifting or uncoupling an implement immediately reduces the additional load. Controlled reversing can reduce the digging condition and free the vehicle along its own lane. Soil compaction Vehicles compact the top and bottom soil depending on wheel load, soil moisture, slip and number of passes. Included are: Topsoil compaction Subsoil compaction Stronger compaction in wet soil Multiple experiences Additional load due to cornering and slipping Plow sole for frequent plowing Different effects of plow, cultivator and subsoiler Targeted reconsolidation by rolling slow biological recovery Compaction and soil structure can be viewed in the field info. Fruit destruction Plants in the immediate tire area may be damaged or completely removed. The native LS25 fruit destruction is used for this. The damage depends on: Wheel load Tire width Soil moisture Slip Cornering Growth stage Root health Soil structure Number of crossings Young plants react more sensitively. Repeated crossings significantly increase the damage. Normal tires remove plants after several trips over the same spot at the latest. Detected maintenance tires reduce the damage, but do not prevent it completely if the vehicle is driven frequently. Root Health Each contaminated soil cell can receive its own root health value. Root damage occurs due to: high wheel load wet ground strong slip Cornering Multiple crossings unfavorable growth stages compacted soil If root health declines, the risk of visible plant damage increases. below 70 percent: increased sensitivity below 40 percent: further crossings lead to destruction more quickly less than 20 percent: very high risk of failure Root health is saved and can slowly recover biologically. Field info and settings menu The mod expands the field information to include numerous land values, including: Soil compaction Underbody status Root health Soil structure Sink factor Carrying capacity Fruit and root damage The settings menu contains detailed descriptions of all options. High and low values, interactions, performance consequences and save game effects are explained. The menu texts are available in twelve languages: German, English, French, Spanish, Italian, Dutch, Polish, Portuguese, Russian, Czech, Hungarian and Turkish. Multiplayer and performance The crucial physics calculations run on the server side. Tire pressure, contamination and important soil conditions are synchronized. To optimize performance, the mod uses: limited groove points adjustable storage intervals Event and bulk caches sleeping floor cells Reduced refresh rates for removed or inactive areas delayed safe initialization of the particle systems Clean release of particle effects when deleting vehicles Version 1.3.7.1: * Tire shader fix * Included all the individual changes and fixes, including runtime/LUA errors, stuck physics, multiplayer, tire/mud shaders, washing, particles, wet ground optics, RWSM compatibility, chunk storage and migration, as well as the complete seeder FPS fixes up to the complete removal of the seeders from the VMT work area paths
Realistic Water & Soil Management (RWSM) v 1.3.8.7
Realistic Water & Soil Management expands Farming Simulator 25 with a permanently stored water, soil and plant balance. Rain, irrigation, evaporation, soil type, terrain, compaction, tire pressure, tillage and plant development are directly intertwined. As a result, fields no longer only react with simple conditions such as “dry” or “wet”, but rather have a multi-layered water balance with topsoil, root zone and subsoil. Natural depressions stay moist longer, heavy vehicles compact wet soil more and inadequate tire pressure increases the load on the topsoil. These influences have long-term effects on soil structure, root health, plant development and yield. Features Multi-layered water balance The soil water balance is calculated separately for: Topsoil from 0 to 10 cm Root zone from 10 to 30 cm Subfloor from 30 to 60 cm Precipitation, irrigation, evaporation, seepage, drainage, surface runoff, plant water absorption, soil type, soil structure, compaction and landform are taken into account. The usable field capacity is displayed separately from the complete pore saturation. Water above field capacity appears as excess water and can seep away, run off or cause waterlogging. Different soil types RWSM differentiates between different types of soil with their own properties, including: loamy sand sandy loam Clay silty clay Each soil type has its own values for field capacity, wilting point, water retention, infiltration, drainage, bearing capacity, risk of compaction and sinking depth. Sandy soils dry faster. Loamy and clay-rich soils store more water, but remain soft longer and are at risk of compaction. Dynamic weather and climate Regional climate profiles influence: Precipitation Temperature Evaporation Wind Humidity Sunlight exposure Seasonal distribution The game’s actual weather data directly affects soil moisture, drying and evaporation. Realistic drying Drying does not take place via a simple timer. Temperature, wind, sun, humidity, soil type, compaction and surface water determine the speed. A wetness memory prevents a field from becoming completely dry and viable again immediately after rain. #Natural depressions and waterlogging RWSM detects local low areas within a field. These areas: collect water dry more slowly have lower load capacity Promote sinking and track formation increase the risk of compaction can cause oxygen deficiency to the roots The terrain evaluation is cached for better performance. Soil compaction The compression is saved separately for: Topsoil Root space Underbody have an influence: Vehicle weight Payload Wheel load Axle load Tire width Tire pressure recommended field pressure Soil moisture Soil type Slip Speed Cornering Multiple crossings High tire pressure puts greater strain on the topsoil for the same wheel load. A suitable low field pressure increases the contact area and protects the ground. High axle loads can still compact deeper soil layers. Multiple crossings Repeated crossings of the same lane are taken into account. The first crossing usually causes the greatest immediate damage. Further passes further compact the already contaminated soil. Among other things, the following are saved: Crossings Compaction Track depth Shear damage Plant damage Edit history Roots and plant stress RWSM simulates: Root health Fine root health achievable root depth Drought stress Waterlogging Lack of oxygen Compaction stress Nutrient stress pH stress mechanical damage Damaged roots are less able to absorb water and nutrients. Impact on earnings The actual yield is influenced, among other things, by: Water balance Dryness Waterlogging Root health Compaction Soil structure Nutrients pH value Seedbed Weeds Lanes mechanical damage Damage does not take full effect immediately, but builds up depending on the strength and duration. Crop Vitality Visuals (Alpha Version) A stored vitality system creates local differences in the plant population. Possible are: different plant heights changed stock density incomplete stocks Visible stress zones weaker development Storage locations The plants remain technically ready for harvest. RWSM does not alter original growth or harvest maturity levels. Weed competition Weeds compete with cultivated plants for water, nutrients, light and development space. Strong weed pressure can reduce development and yield.## Tillage Different devices have different effects: Plow Cultivator Disc harrow Rotary harrow Subsoiler Seeder Roller Working depth, soil moisture, compaction, soil structure, seedbed strength, multiple cultivation and possible plow soles are evaluated. Deep loosening is only fully effective when the soil moisture is suitable. Cultivating when the soil is too wet can cause additional structural and lubrication damage. Seedbed and rollers RWSM evaluates seedbed strength. A seedbed that is too loose offers poor soil sealing. Too much reconsolidation can impair air flow and root development. Rolling acts as a real area-wide reconsolidation and is evaluated depending on the type of soil, moisture and compaction. Irrigation system The mod includes a functional Rainstar irrigation system with: Motor pump Hose reel Sprinkling rail adjustable pump pressure adjustable radius real application rate Water consumption Soil input in millimeters automatic hose retraction Work and transport mode Parking brake Clutch aid Connection markers sound visible water jet The water applied changes the actual water balance of the soil. Extended field info The field info shows, among other things: Topsoil moisture Pore saturation Surface condition Excess water Water in all layers of soil Soil type Evaporation Temperature and wind Compaction Soil structure Seedbed strength Root condition Plant vitality visible height and density main cause of stress Climate values Water-Soil API RWSM provides a versioned interface for other mods. The API provides, among other things: Soil type Soil moisture Pore saturation water available to plants Surface moisture Carrying capacity Trafficability Sink factor possible sinking depth Compaction Track depth Root condition Evaporation recommended tire pressure Plant vitality Other mods can report traffic loads and ground effects back to RWSM. Connection with Visual Mud Tracks In connection with Visual Mud Tracks, among other things, the following are transmitted: Wheel load Axle load Tire pressure Tire width Slip Vehicle weight Payload Soil moisture Carrying capacity Sink factor possible track depth This allows visible tracks, sinking, mud and tire behavior to be linked to the actual ground condition. Saving and multiplayer The following are permanently stored and synchronized, among other things: Water balance Precipitation history Compaction Track depth Soil structure Root condition Edit history Plant vitality Irrigation data Pump pressure Irrigation radius Hose retraction The calculation is server authoritative and designed for multiplayer saves. Highlights 1. Multi-layered water balance Topsoil, root zone and subsoil react separately to rain, irrigation, evaporation and infiltration. 2. Long-term compaction with an impact on yield Tire pressure, wheel load, axle load, soil moisture, slip and multiple passes influence the soil and plants in the long term. 3. Direct connection to Visual Mud Tracks Soil moisture and load capacity control sinking, tracks, mud and tire behavior. 4. Local waterlogging in natural depressions Low areas stay wet for longer and become real problem areas. 5. Visible Plant Vitality Elevation, density and stress zones can vary locally without changing crop maturity. 6. Realistic tire pressure influence Excessive pressure increases topsoil stress, while appropriate field pressure protects the soil. 7. Root Health and Long-Term Plant Stress Dryness, waterlogging, compaction, pH value and nutrients work together. 8. Functional irrigation Pump pressure, radius and application rate determine the real water input. 9. Different tillage systems Plows, cultivators, subsoilers and rollers have their own effects and risks. 10. Extensive field info Water, soil, compaction, roots, seedbed and plant condition are directly visible. 11. Persistent Multiplayer System Ground and water damage is retained and synced after saving. 12. Open Water-Soil API Other mods can read land values and connect their own systems to them. 13. No change in growth stages RWSM assesses and visualizes plant stress without overwriting original harvest maturity levels. The pump only reads the real vanilla hose status: Hose not connected → Pump does not start Hose disconnected while pump is running Pump switches off immediately Weather Hud 3 size adjustment options now available. Normal, small, very small And Vanilla Hud Performance fixes Version 1.3.8.7: * Major performance conversion, event-based vehicle register, work area optimization, weed cache, shared RWSM/VMT wheel contact core and fix of the critical wheel contact Lua error * Comprehensive reconstruction of the actual soil model: three layer water balance, infiltration, runoff, deep drainage, Kc, TAW/RAW/Ks, dynamic root depth, frost, soil structure and seasonal yield * Multiplayer/Sync level B, quantized network data, terrain/density callback broker with VMT, only purchased real fields, streets hidden and event driven ground calculation instead of permanent full field queries * Consistent conversion against the seed machine FPS drops. Chunk-based processing and finally no more RWSM WorkArea geometry for Seeder/Planter * Field info revised: nFK, three water layers in mm, irrigation requirements, understandable soil status, adaptive scaling and concrete soil improvement recommendations. The Lua syntax error has been fixed * Field info stabilized; in particular root health 100% and changing compaction values were stabilized * New ground following Rainstar hose and distance-independent auto reel, so that the move continues even without a player right next to it. * Savegame start stabilization for Rainstar. 5 second protection phase prevents pulling impulses and the problem of the machine standing on its back or being unstable after loading * GIANTS hose as a visibility fallback in case the new ground hose is not initialized correctly * Fixed missing externalShapesFile reference so that the IrriFrance hose mesh actually loads
CNH Square Balers Pack Rust Edition v1.5
– Required power: 230 hp – Working speed: 17 kph – Bale dimensions: 180cm – 240cm – Added rust for wear shader – Free configs – Added balers to baling contracts Changelog 1.5.0.0 – Updated the modDesc
- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro