Farming Simulator 22 mods
47,970 results- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro
FS22 Pronar T022 v1.0.0.9
FS22 Pronar T022 v1.0.0.9 Hello, i am reuploading this Pronar T022 from Omse, because i added better collisions and lights. Specs : Price – 12 000 EUR, You can configure Brand – Metal Fach or Pronar.
LodeKing Distinction Super-B Bulk v1.9.0.0
LodeKing Distinction Super-B Bulk v1.9.0.0 Category: Semi Trailers Price: $138500 Capacity: 75600 Optimized the file Added all filltypes Free configs Increased empty speed Can buy front or back seperate Changelog 1.9.0.0 Updated the moddesc
Peecon LR290 Roller Rust Edition v1.6.0.0
Peecon LR290 Roller Rust Edition v1.6.0.0 Peecon LR290 Roller 2 versions one as silage compactor or a land roller Cost 2845$ Added rust for wear shader Changelog 1.6.0.0 Improved textures
Landini Serie 7 Robo-Six Rust Edition v1.5.0.0
Landini Serie 7 Robo-Six Rust Edition v1.5.0.0 Category: Medium Tractors Price: $154000 Power: 190 hp – 225 hp Max. speed: 50 kph Added rust for wear shader Free configs Added window tint configs Changelog 1.5.0.0 Updated the modDesc
Kverneland Ecomat Rust Edition v1.4.0.0
Kverneland Ecomat Rust Edition v1.4.0.0 Category: Plows Price: $35000 Required power: 220 hp Working width: 3.5m Working speed: 12 kph Added rust for wear shader Free config Changelog 1.4.0.0 Updated the moddesc
CLAAS Liner 4900 Rust Edition v1.5.0.0
CLAAS Liner 4900 Rust Edition v1.5.0.0 Category: Windrowers Price: $98500 Required power: 115 hp Working width: 15m Working speed: 30 kph Faster work speed Added rust for wear shader Changelog 1.5.0.0 Updated the moddesc
Lizard Snow Pusher Rust Edition v1.2.0.0
Lizard Snow Pusher Rust Edition v1.2.0.0 Lizard Snow Pusher Cost 4600$ Works on skidsteers Frame color config Bolts color config Skids color config Added rust for wear shader Changelog 1.2.0.0 Updated the modDesc
New Holland Pack v1.1.2.0
New Holland Pack v1.1.2.0 This pack includes a New Holland CX 7.70, a 28ft Varifeed, a 41ft Varifeed, and a corn header. It also features many interactive control points, a blockage system (for when the fill level isn’t monitored), pipe and grain tank configurations, color selection, work cameras, a passenger seat in multiplayer, and many more shop configurations. Version 1.1.2.0 New: A red warning light now stays on at 95% fill level, indicating that unloading is necessary. It only goes off when the fill level drops below 95% or the combine jams. New icon Changed: The yellow 85% warning light now stays on at 85% fill level and only goes off when the fill level drops below 85% or the combine jams. Icons and numbers no longer appear to be obscured by the warning. The DBL page is now the home screen when the engine is started. When the engine is off. Is the main monitor completely off (no icons are visible)? The New Holland Pack includes: A New Holland CX7.70 with many realistic interactive features, A Varifeed 28ft header, which also has interactive features, A Varifeed 41ft header, also with interactive features, and a corn header. CX 7.70: Exterior interactive features: Move the straw chopper forward/backward, fold the ladder in/out, attach/detach the PTO guard on the left side, and attach/detach the front guard. Interior interactive features: Fold the ladder in/out, turn all monitors on/off, switch between four main monitor displays (which also have interactive features), turn the beacon on/off, turn the front/rear pipe lights on/off, make the windshield wipers wipe once, open/close the grain tank, start/stop the engine, turn the threshing drum (header) on/off, and fold the pipe in/out. Configurable in the shop: New Holland logos, warning LEDs, additional LEDs on the sides, anti-Claas, John Deere, and Case decals, DJB decals (offer a discount), advertising on the roof (Häckterjäger, DJB , Forbidden mod ) or New Holland, tires, straw chopping width [between 9.15m and 12m], warning signs, pipe length [small, medium, large], passenger, rotating beacon, tiger decal, door stickers, cooler, warning LEDs on the warning sign, and grain tank size. Varifeed28ft: 8.5 meters Available in the shop: Old straw dividers, rapeseed table, new straw dividers, and Claas, Case, Fendt, John Deere, and New Holland (with blue logos) paint schemes. LEDs and DJB decals IC: Fold old crop dividers in/out, attach/remove blade guard on rapeseed table. Varifeed 41ft 12-meter working width In the shop: Old crop dividers, rapeseed table, new crop dividers & logos. IC: Fold old crop dividers in/out, attach/remove blade guard on rapeseed table. Corn header: Standard from the game. Also added across versions: New realistic clogging system with load-dependent activation (message appears when a blockage occurs and again when the blockage is cleared) [idea by dj-netti] Manual unblocking via Interactive Control (recognizable by a new icon at the rear of the straw chopper) New warning symbols and buzzer for blockages Dust effect when unblocking Alarm indicator at 85% fill level (briefly lights up on the DBL dashboard) New road mode with a maximum speed of 42 km/h (unfolding or starting the combine is not possible in road mode. A message flashes when attempting to do so) Field mode with automatic working speed limiter (field mode reduces the maximum speed to 20 km/h and allows unfolding and starting the combine) Threshing unit: To activate a header, the threshing unit must first be activated. When attempting to start the header without the threshing unit, the message “RPM too low” appears. Enhanced Interactive Control functions: Switch between field and road modes in the cab. Unblocking the straw chopper. New ladder: fold in/out and rotate. New folding and rotating ladder configurable in the shop. Added Flexdraper FD250 header as a combination. Added passenger seat in multiplayer – cooler/passenger no longer selectable. Added color selection. Without a header, the feeder can be raised and lowered (key assignments are freely configurable). The Varifeed 41ft now has a camera on the left side. The image is visible in the cab. Selectable New Holland 3D logo from the CR11. Removable wheels via IC with sound and custom icons for roleplay, for example. Dashboard built to be compatible with Live. (Template from Case Axial Flow 150 Series. Thanks to Doofy for permission) Pipe ends are now adjustable via mouse control with sound and visible hydraulics. Tire pressure control system installed with its own sound (you can hear escaping air when deflating and a compressor when inflating). The Tire Pressure Control System mod is required for this. Rotating beacons have been added. Selectable options are: 3 large rotating beacons, 3 large flashing LEDs, 3 small rotating beacons, 3 small flashing LEDs, or only 2 large rotating beacons (rear + center on the roof). Work cameras that display a live image on the new monitor in the cab. (Rear reversing camera, two on the pipe, and one on the drawbar. Optical cameras for decoration: two on the pipe and one at the rear of the vehicle. Required mods: Interactive Control RealGPS Precision Farming Tire Pressure Control System Combine XPerience EnhancedVehicle Dashboard Live Mercedes-Benz Trucks Pack
PJU-9 Sprayer v1.0.0.0
PJU-9 Sprayer v1.0.0.0 Sprayer converted from fs19 Wheel configuration Sticker color configuration Tank color configuration Frame color configuration Rim color configuration Dynamic hoses, moves whenever moving over bumps, turning or braking. Added sound while working Enjoy!
Kuhn MergeMaxx 950 Rust Edition v1.4.0.0
Kuhn MergeMaxx 950 Rust Edition v1.4.0.0 Category: Windrowers Price: $96000 Required power: 140 hp Working width: 9.5m Working speed: 18 kph Added rust for wear shader Changelog 1.4.0.0 Updated the moddesc
Kuhn GA 15131 Rust Edition v1.4.0.0
Kuhn GA 15131 Rust Edition v1.4.0.0 Category: Windrowers Price: $96500 Required power: 115 hp Working width: 14.7m Working speed: 15 kph Added rust for wear shader Changelog v1.4 Updated the moddesc
Kuhn DC 401 plow v1.5.0.0
Kuhn DC 401 plow v1.5.0.0 Category: Plows Price: $11500 Required power: 130 hp Working width: 4 Working speed: 24 kph Now works faster Added rust for wear shader Changelog 1.5.0.0 Updated the moddesc
Kuhn GMD 4411 Rust Edition v1.5.0.0
Kuhn GMD 4411 Rust Edition v1.5.0.0 Category: Mowers Price: $18000 Required power: 80 hp Working width: 4.35m Working speed: 22 kph Added rust for wear shader Added to mowing contracts Changelog 1.5.0.0 updated the modDesc
Kuhn HR 4040 + VENTA 4030 Rust Edition v1.4.0.0
Kuhn HR 4040 + VENTA 4030 Rust Edition v1.4.0.0 Kuhn HR 4040 Category: Power Harrows Price: $25000 Required power: 160 hp Working width: 4m Working speed: 12 kph Kuhn HR 4040 + VENTA 4030 Category: Seeders Price: $50000 Required power: 220 hp Working width: 4m Working speed: 12 kph Capacity: 1800 L Added rust for wear shader Added direct sowing Changelog 1.4.0.0 Updated the moddesc
Kuhn GF 8712 Rust Edition v1.6.0.0
Kuhn GF 8712 Rust Edition v1.6.0.0 Category: Tedders Price: $16000 Required power: 60 hp Working width: 8.7m Working speed: 30 kph Added rust for wear shader Can now use the tedder for tedding contracts Changelog 1.7.0.0 Updated the moddesc
- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro