Farming Simulator 19 mods

tractors

New Holland 3162 Draper 45FT v1.0.0.0 Mod

New Holland 3162 Draper 45FT v1.0.0.0 Mod Characteristics: – Price: 89,000 – Choice of main color – Color choice of rim color – Working width 13.7m – Working speed 20Km / h (only works in connection with my Mod New Holland CR1090 Maxi)

Download 1

other

Courseplay v6.03.00028 Mod

Courseplay v6.03.00028 Mod 6.03.00028 Fixes #6713 Also includes potato harvester pull back course fix for #5012 course generator screen update for #5102 Fixes #5012, #5102 6.03.00025 Mode 2/3 Improvements fixes #6633 (Distance to next turn may not be defined for instance in the last row) tried to make the rendezvous more fault tolerant use a higher fruit value limit in the hybrid parts as it is not a problem getting temporarily closer to the fruit there, and it speeds up the pathfinding quite a bit. reduce off field penalty when combine on headland for faster pathfinding better driving time estimation to rendezvous point now considering turns we have to make to get there improved chopper handling in turns with headland at an angle 6.03.00024 Bridge and proximity sensor fixes Goal node elevation fixed (#6665) Proximity sensor directly on the back of the combine/chopper allowing for the unloader to get closer. When driving over non-level bridges, the controlled node isn’t vertical and the goal node was positioned on the ground level which is way below the vehicle. Due to this, the goal’s position in the controlled node’s reference wasn’t accurate in this situation, seemed to be a lot closer when driving uphill, lot further when driving downhill. Uphill goal being too close caused oscillations in PPC. Moved the goal point on the level of the vehicle (controlled node), so the error caused by the non-vertical controlled node is negligible. Few proximity sensor and vehicle size fixes Proximity sensor sits on the back of the combine now fixed pathfinder vehicle data rectangles, clarified the misconception that the direction node is always on the root node, it is not, the direction node is the turning node, usually sits between the non-steered wheels. 6.03.00022 Minor fixes fix all hybrid A* pathfinder failing fix reset fill level after making pocket 6.03.00021 Course generator and turn fixes No extra headland circle (#6605) Fixed the calculation of the headland/middle transition. If the center mode is lands, there is still a small chance that an almost full circle connecting track will be added if the starting point is very close to the start/end of the first working row of the lands pattern. Partial fix for #6383 do not add straight section to turn end to align if there is no towed implement if turn on field enabled but there’s no space to turn (must reverse), use the legacy wide turn (which is also buggy a bit). if you don’t want your sprayers boom hit obstacles outside the field, use a headland. 6.03.00020 Mode 2/3 improvements Wait before starting the next row if the rendezvous point is close to the row end. use A* to calculate distance to combine before the rendezvous. combine notifies unloader on missed rendezvous, unloader re-plans route try to approach combine waiting after backing out of the fruit from the rear so we won’t cut in front of it. don’t slow down around rendezvous when discharging already don’t ask for a rendezvous when the combine is not willing to, for example when unload is disabled on the first headland. won’t initiate new rendezvous until the combine cancels the current one move up rendezvous points close to row end pipe in fruit map changed to have a 20 m buffer at each end of the row to account for non-perpendicular headlands. fixed offsets when calculating target to combine, sometimes it used the side offset as front offset. make sure to reset 95% full limit after making pocket added safety margin to the calculation of the distance until full All this to avoid the situation where the combine stops before reaching the rendezvous point because it thinks it is full (although only 95%) only considers unloaders actually waiting for assignment, ignore the ones on unload course for example when a combine is looking for an unloader if an unloader is already assigned to a combine, only it is waiting for the combine to become ready for unload (for example due to fruit in pipe), assign the same combine to it. This should probably be refactored, adding a new state for the unloader, like WAITING_FOR_COMBINE_TO_BECOME_READY or so.

Download 1

harvesters

New Holland CR1090 Maxi FS19

Characteristics: - Price: 350,000 - Power: 700PS Working speed 10Km / h Max forward speed 40Km / h Max speed backwards 15Km / h - Power: 1156PS Working speed 20Km / h Max forward speed 75Km / h Max speed backwards 30Km / h - Configuration capacity: 14,500 - 22,000 - 45,000 liters - Main color configuration - Configuration of rim color - Tire configuration - Shed dirt - Working speed 20KM / h only works in connection with my mods Capello QuasarHS16 and New Holland 3162 Draper 45FT

Download 1

harvesters

New Holland 3162 Draper 45FT FS19

Characteristics: - Price: 89,000 - Choice of main color - Color choice of rim color - Working width 13.7m - Working speed 20Km / h (only works in connection with my Mod New Holland CR1090 Maxi)

Download 1

tractors

John Deere 1630 v3.0 FS19

John Deere 1630 v3.0 FS19 v3.0 I take no credit for this mod all i did was fix two incorrect lines in the XML. Credits:Michu, Kamil R1, Patton_M47 Tags: John DeereXML

Download 1

other

DLC PRECISION FARMING MODIFIER v1.0.0.0 Mod

DLC PRECISION FARMING MODIFIER v1.0.0.0 Mod Hello everyone, I have reworked the precision farming DLC with the addition of 2 elements in fertilizer, which are compost and anhydrous. This Precision Farming DLC adds more realism and aspects of real farming in Farming Simulator. The emphasis is on the different types of soil, each of which affects the growth of your crops. This DLC adds a map specifically designed to give you new detailed information about the ground at different points in the terrain. You can access this map through a tab next to the world map in the menu.

Download 1

placeables

Mining And Construction Deco Pack V1.0 Mod

Mining And Construction Deco Pack V1.0 Mod This time I create some new mods to decorate your map. This pack includes -Dynamic Concrete Wall (You can lift with tension belts) -Placeable Concrete Wall -Perimeter Wall 80x80meters (Need to flat the area first for better result) -Mining and constuction warning sign (11 design available) -Mining pit warning board -FS Miner Sign -Metal base for FS Miner Sign , or anything you want -All objects has tension belt support…

Download 1

implements

PACK GODET TCM V2 (PC490 V2) Mod

PACK GODET TCM V2 (PC490 V2) Mod Bucket pack for our komatsu PC490 The pack contains: 1 cleaning bucket 1 mining bucket 1 cup of slicing ChangeLog V2: -Correction of bucket capacities

Download 1

implements

Noremat epareuse v1.0.0.0 Mod

Noremat epareuse v1.0.0.0 Mod This is a reskin of the roof mower fromoineModding, with its permission I put in dl my reskin of the Ferri mower in Noremat mower. addition of a “mowing” triflash color modification

Download 1

other

Interactive Fertilizer Spreaders FS19

These spreaders can be unloaded anywhere if the unloading point is not blocked by another object. Unloading at sales points and storages is also possible. The cover must be open for this. This also applies to the Bredal spreader if you have not bought a cover. When you buy the cover, you can choose whether the hydraulics work or just open the tarp. Unloading in big bags is also possible and can be selected in the workshop. This package includes: 1. Kuhn AXIS 40.2 M-EMC-W Price: 20000 Capacity: 3200 l Required Power: 100 hp Working Width (Fertilizer): 24 m Maximum Working Speed: 20 kph / 12 mph 2. Bredal K105 Price: 39000 Capacity: 9000 l / 11000 l / 14000 l Required Power: 200 hp Working Width (Fertilizer): 24 m / 30 m Working Width (Lime): 12 m / 18 m Maximum Working Speed: 20 kph / 12 mph 3. Bredal K165 Price: 67000 Capacity: 15600 l / 18950 l Required Power: 300 hp Working Width (Fertilizer): 24 m / 30 m Working Width (Lime): 12 m / 18 m Maximum Working Speed: 20 kph / 12 mph More features: + Color choice for main color, tarp and rims + lighter pollution + Dust effect for lime (only Bredal K105 and K165)

Download 1

placeables

DynaGro ESNFert bags PHTMan v1.0.0.0 Mod

DynaGro ESNFert bags PHTMan v1.0.0.0 Mod 1 Support for hooking and unloading seed and fertilizer bags with front loader – 1 Big bag of Nurtrien ESN fertilizer – 1 Big bag of DynaGro seed I just edited logos to show Nutrien’s ESN Fertilizer and DynaGro Seeds from Nutrien Ag Solutions

Download 1