Farming Simulator 22 mods
50,266 results- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro
FS22 Claas Lexion Pack (Interactive Control) v1.0.0.0
FS22 Claas Lexion Pack (Interactive Control) v1.0.0.0 Hello everyone! After many (really many) hours of tinkering, the time has finally come and I can present you my version of the Claas Lexion Pack from the lovely DoctorKorXX “Stucki” from the DorfDödels. At this point we would like to thank you again for allowing us to publish it! The pack has been updated and intensively developed. The main features include the integrations of InteractiveControl, DashboardLive, CombineXP and Workcameras. Features: DashboardLive integration – Main display with numerous completely new decals based on the original model – CombineXP integration – Main display can be switched to road driving mode with its own DBL page –> completely new view with your own new decals and sliders – The two GPS screens are also equipped with DBL and have received new screens and features. From your own minimap icons to lane guidance and many other details – The top GPS is switchable between GPS guidance mode and minimap view – Sounds for DBL InteractiveControl – Complete conversion to InteractiveControl Numerous functions can be controlled via IC. These include: – All animations already known from the pack (top and maintenance flaps, doors, ladder, tank cap, sun visors, …) – Folding the bunker in/out – Pipe control (folding in/out, bunkering, light) – Cutting unit control (on/off, up/down, …) – Separate threshing mechanism control (requires CombineXP) – Light control (outdoor lights/work lights, RUL, tube light, cabin light, …) – Cutting units: Rapeseed knives and stalk dividers that can be mounted via IC – More little details to explore 😉 Support for Workcamera Mod The thresher itself has several work cameras that support you at work and when maneuvering, e.g. – Backup camera – Pipe camera – Bunker camera – Train mouth camera – Camera for attaching the cutting unit Credits:- Tags: DBLGPSICRUL
LS22 Case Steiger 9190 VE v1.2.0.0
Price: 145000$ Power: 525hp Wheel configuration Choosing the color of the wheels Fans are animated Working mirrors Gets dirty Support for IC mod (doors, windows)
Claas Lexion Pack (Interaktive Steuerung) v1.0.0.0
Claas Lexion Pack (Interaktive Steuerung) v1.0.0.0 Hallo zusammen! Nach vielen (wirklich vielen) Stunden des Tüftelns ist es nun endlich soweit und ich kann euch meine Version des Claas Lexion Packs vom lieben DoctorKorXX „Stucki“ vom DorfDödels präsentieren. An dieser Stelle nochmals herzlichen Dank für die Erlaubnis zur Veröffentlichung! Das Paket wurde aktualisiert und intensiv weiterentwickelt. Zu den Hauptfunktionen gehören die Integrationen von InteractiveControl, DashboardLive, CombineXP und Workcameras. Merkmale: DashboardLive-Integration – Hauptdisplay mit zahlreichen komplett neuen Decals basierend auf dem Originalmodell – CombineXP-Integration – Hauptdisplay umschaltbar auf Straßenfahrmodus mit eigener DBL-Seite –> völlig neue Ansicht mit eigenen neuen Decals und Slidern – Die beiden GPS-Bildschirme sind ebenfalls mit DBL ausgestattet und haben neue Bildschirme und Funktionen erhalten. Von Ihren eigenen Minikartensymbolen bis hin zur Fahrspurführung und vielen anderen Details – Das obere GPS ist zwischen GPS-Führungsmodus und Minikartenansicht umschaltbar – Sounds für DBL InteractiveControl – Vollständige Umstellung auf InteractiveControl Zahlreiche Funktionen sind über IC steuerbar. Diese beinhalten: – Alle bereits aus dem Pack bekannten Animationen (Dach- und Wartungsklappen, Türen, Leiter, Tankdeckel, Sonnenblenden, …) – Ein-/Ausklappen des Bunkers – Rohrsteuerung (Ein-/Ausklappen, Bunkern, Licht) – Schneidwerkssteuerung (Ein/Aus, Auf/Ab, …) – Separate Dreschwerkssteuerung (erfordert CombineXP) – Lichtsteuerung (Außenleuchten/Arbeitsleuchten, RUL, Leuchtstoffröhrenlicht, Kabinenlicht, …) – Schneidwerke: Rapsmesser und Stängelteiler über IC montierbar – Weitere kleine Details zum Entdecken 😉 Unterstützung für Workcamera Mod Der Drescher selbst verfügt über mehrere Arbeitskameras, die Sie bei der Arbeit und beim Manövrieren unterstützen, zB Rückfahrkamera – Rohrkamera – Bunkerkamera – Trainieren Sie die Mundkamera – Kamera zur Befestigung der Schneideeinheit Tags: DBLGPSRULZahlreiche Funktionen
LIZARD C-330M V1.1
#gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 20%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } /* see gallery_shortcode() in wp-includes/media.php */ C330M The tractor has the following information: Base Price: 15500 $ Power: 31,5 HP Top Speed: 27 kph Configurations: – Tires – Front weights – Cabin – Mudflaps – Front fenders – Wheels weights – Colors (engine, the color of the hood and fenders, rims, front grille) – Stickers (black, silver) – Interactive Control Changelog: + Changelog 1.1.0.0: – The front mask model has been improved – A new cabin has been added – The front axle has been improved – The values of fuel quantity and gravity mass have been improved – Triangle added – A new color palette has been added to the cabin – A new light system has been added – Improved sounds – Improved front fenders – Improved gear template Credits: Speedy Download mod File File size FS22_UrsusC330M 43 MB
Courseplay for FS22 v7.4.1.3
Push Release 7.4.1.3Towed dewulff harvester, that constantly need an unloader, are now calling an unloader. (last improvement for #2972 )Hawe SUW 5000 is now working correctly as an overloader wagon. #3198Bale collecting use the same return to target before hand over to AD like combine unloader. #3247Pathfinder improvements and fixes for #3242Fix for #3265Fix for #3273Shovel position is slightly tilted down and finer hight adjustment (0.05 steps). This should help with some silage silos are not getting empty.Known Issue:Job selecting is still bugged in MP ( #3233 ) and will get a new Release as soon as we have a fix for it.We just don't want you to wait longer for the other fixes so we push this one for now.Push Release 7.4.1.2Added vehicle config option to override default distance from turn end where tight turn offset is applied in 180 turns. Helps with #3173Added a vehicle configuration for combines with a pipe or conveyer that folds up from below.Combine self unload speed for approaching to the trailer is now set to a maximum of 10km/h or lower depending on the field speed.Different code improvements.Reset to default map zoom on save start. #2962Some adjustments to bale collector/wrapper mode.fix for #3181Combine unloader, no collision check for the trailer for the first few meters. (fixes situations, where the unloader drive in reverse for no reason.)Waypoints no more cast a shadow, this might increase performance a bit, when have waypoints active.Some pathfinder refactoring.HUD reworked for a future project.HUD help menu reworked. Translations have to be remade, sorry to our translators, but we had to do that step. The help menu looks better now though and is more structured for the HUD.Push Release 7.4.1.1Sugar beet auger wagons should work better now and added a small speed while unloading for better distribution (not yet perfect) #3098Unloader waits until all combines are done with the work on the same field. #3072Added line preview when drawing a custom field on the map and can hold left shift to draw straight lines. #1871Push Release 7.4.1.0GUI ImprovementsAdded unloader support for Dewulf zkivse.Added chopper unloader support known from FS19 back in. (The pre call for the 2nd Unloader is not added, maybe at a later Version)General unloader improvements, for example the unloader and combine will drive the full row and not stop close to the end of the row.Added call unloader at % setting for combine, adjustable from 60% to 90% with 5% incremental steps by @MatteoDelfaveroPush Release 7.4.0.2Code improvementsImproving how root vegetable harvesters are recognized by @tn4799Fix silo driver park position.Fix for #3012Fix for #3034Fix for #2828Fix for #3038Added food mixer wagon, fertilizer/lime/manure sprayer and Göweil LT Master as valid target for shovel mode.3-point attached tools and the Göweil will be targeted from behind to fill up.Push ModHub Update 7.4.0.0ModHub Update Versionfix for #2940fix for #2933fix: combine self unload pathfinder failurePush Release 7.3.1.4Some shovel position fixes and added missing high dump shovels to vehicle config.fix for #2865fix for #2889Added fruit type check for mission and season. #2885 #2891Increased silo area to avoid hitting the walls.Translations fixes (our script failed so we had to redo some translations).Unloading combine improvements. #2884Separated the offset and renamed it to be more clear what it does.Can now use a truck + trailer to unload.We will not add a 2 trailer support to our combine unloading, because it would be impossible to do reverse driving, wich is highly important for our combine unload mode. What does work now is a truck with a fixed or attachable loading area alone or with an additional trailer.Push Release 7.3.1.3Changed description for combine unload on 1st headland to be more clear, also set the default setting to false.fix for #2592fix for reversing turn.Pipe won't open for a CP combine unloader that is in idle state.Removed Giants collision that prevented our unloader to react to our combine.fix for #2812fix for #2801fuel info now is shown when AI driver is stopped because of low fuel for all setting states by @tn4799fix for the info messages not always clearing correctly on MPAdjusted silo end detection with shovel loading. #2783Added columns to silo map, for selection of the optimal silo part to load.Fixes bug for bunker silo driver, where driving to park position failed. #2783Added leveler height offset to the ground setting.v7.3.1.2:Removes old distance check from shovel driver unloading into trailer, that prevented the new area to function correctly.Push Release 7.3.1.1increse skip row for vine generator to 4 #2787 (but the Oxbo harvester is broken...)fix for #2788Added manure trailer unload target support for shovel mode.Added marker to select trailer unload space for shovel mode.Push Release 7.3.1.0fix for #2768fix for #2777fix for #2761 and other plow improvements.Improvement for reverse driving with offset tools (e.g. plows or potato harvester)Plows default noReverse configuration was removed, User who want them to not drive in reverse turn off "turn on field" or can also turn on "use pathfinder in turns".Added shovel mode back in. #2254Please check the in-game help menu for how to set up the new mode.We can't support all kinds of shovel vehicles (like bobcats) as they were built inconsistently (like the tool arms are sometimes flipped, and so on).If it turns out to be a lot of non-working shovel vehicles, we'll consider implementing some kind of Tool Position Saver (like our separate mod) or find some another solution, until then, we would prefer keeping the automatic control.We were not able to test all different kinds of combinations. If you have a vehicle that does weird things, pls post a screenshot (with debug on) in our Issue: #2783.
FS22 EGG PRODUCTION
FS22 EGG PRODUCTION Fixed Prices Added a Small Building for Small Maps Logo Added Ready for Premium Version
FS22 DU-54 v1.0.0.0
FS22 DU-54 v1.0.0.0 Road roller DU-54 with full Terrafarm support. Fully working roller, supported by my latest version of Terrafarm. Can level any surface and soil. Completely clean log without errors. Credits:MAPBEH AVSR
FS22 Adjustable Spreader Bar v1.1.0.0
FS22 Adjustable Spreader Bar v1.1.0.0 This is an updated version of the Adjustable Spreader bar that I had released before. It has been adjusted to help with lifting the Bridge spans. v1.1.0.0 Updates: – Reduced color options – Adjusted lift straps to match LR 1600/2 hooks – Adjusted lift straps from Spreader to load Credits:Jeremy Brown Modeling and Simulation Tags: Adjustable SpreaderLR
- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro