Farming Simulator 22 mods
49,932 results- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro
CVT Addon v1.2.9 – FS22
CVT Addon v1.2.9 – FS22 This script adds all vehicles with continuously variable transmissions a genuine CVT transmission or hydrostatic transmission. Changelog 1.2.9.0 – Warmup for wheelloader fixed. – removed danger table dev console command. – Cars and Trucks are configureable. – Issue with handbrake in modern config for AD and CP fixed. – RPM dropping reduced when reaccelerating with throttle. This can be configured in the shop. You can also choose between a classic or modern variant. – Realistically, it is always selected to match the vehicle. Important: The key bindings for the CVT add-on must first be assigned. All settings in the LS should be set to manual. Manual shifting and clutch. No automatic control systems may be active. If you want to drive realistically, you will do this anyway. The CVT addon should be actively used and not just a “it runs in the background” mod (customise for the respective application) The vehicle XML value “rotInertia” (flywheel) must not be specified, or it must be precisely coordinated. And as a reminder, the engines have to warm up first. If in doubt, please take a look at the tutorials. Setting options: General CVT: – 4 acceleration ramps can be set. – Braking ramps can also be set. – TMS pedal mode can be activated. – Automatic differential lock can be activated or preselected. This requires the mod FS22_VehicleControlAddon or FS22_EnhancedVehicle is required. – Efficient working with the machine at maximum power. – To be able to start the engine, the clutch must be actuated. Classic CVT: -2 driving ranges can be shifted here. Modern CVT: – The driving ranges shift automatically. – The parking brake is activated as soon as you move away from the driver’s seat. FS22_VehicleControlAddon or FS22_EnhancedVehicle required. – Low-speed concept, enables even more eficient working. – Convenient operation thanks to fewer required setting parameters. Hydrostat and HST drive: – The 2 basic variants are selected by switching the drive ranges. – In this configuration, the single acceleration ramps are declared as speed levels. – Both hydraulic drive types can be set in motion by a percentage accelerator pedal. With the hydrostat (the older or simple variant), the hand throttle must be used to A. reach the final speed, B. increase the hydraulic pump capacity, e.g. to increase the speed and lifting power of the frontloader on the yard or wheelloader to achieve more speed and lifting power. – In the newer version, this is largely regulated automatically, but the hand throttle can still be used to to carry out front loader work more agilely. – If FS22_VehicleControlAddon is active, the parking brake must be applied to start the engine. Heat, overheating and wear: – Engines must first run warm enough to avoid generating increased wear under load. – Improper use and incorrect adjustment when driving, especially under load, can cause the gearbox to wear out more quickly. – If the pressure is too high, the gearbox can overheat and thus cause wear. – The engine temperatures are only synchronised with FS22_DashboardLive in Multiplayer! DBL must be active at least with . Influence on the functions and functions that create influence: The engine braking effect: – Is calculated dynamically by various factors. Among other things, weight, speed, wind, incline or decline play a role, engine power (unfortunately not cubic capacity), engine speed range and speed, etc. play a role. Also depending on which acceleration ramp is selected. Starting the engine: For continuously variable vehicles, the clutch must be depressed, which is also the normal clutch. In hydrostatic configuration, if VCA is active the handbrake must be applied in order to start the engine. In addition, the hand throttle must not be pulled up, it must be set to 0. Driving ranges: There are 2 driving ranges, II. is intended for road travel, transport and light work. Stage I. is more for heavy field work and heavy transport. Here the maximum speed is also reduced and the torque provides more thrust, especially when starting off. A button assignment must be assigned for each level. The driving ranges should be changed when the machine is stationary, as this can also cause damage. *A little tip, if you use the group shift buttons for up/down, you can use the same buttons for the speed steps. A special feature of the “modern” configuration is that the driving ranges are regulated. Acceleration ramps: Furthermore, there is now an acceleration ramp in 4 stages, which can be switched through with one button. This influences the acceleration behaviour when accelerating and reducing the driving speed. Smooth and with feeling or full power and rough. With heavy implements or trailers, can cause high pressure in the planetary gearbox and damage it! In this case, the acceleration ramp should be set to 3 or less. Level 4 is more suitable for empty runs. For light field work, you can easily pull at speed level 1 in acceleration ramp 4 – for example, disc harrow, flat cultivator. Further detailed explanations of the details can be found in the Escape help menu and in the Wiki on Github, as well as tutorial videos. Almost all values and settings can be used with FS22_DashboardLive. More detailed informations about it at the wiki on Github. Feel free to provide ideas, feedback and reports at Github: FS22_CVT_Addon please. Changelog 1.2.0.0 (inkl. Hotfix for 1.0.0.1) – changed strucure of Version from 1.0.0.x to 1.x.0.0 because litte fixes can be better different between github and public. – HOTFIX: vehicle with bigger engines couldn’t warmup and cooled down while just standing. – CP & AD, AccRamp has to adjust before start a helper now. – DBL value for handthrottle animation added. Same principle as for the clutch. – Telemetry data transfer added. (Info in DC) Changelog 1.0.0.1 – Motor start with config NO fixed – AD/CP was switched back and forth too wildly – DBL parameters adjusted, see Wiki – Boat on the Hof-Bergmann could not be driven. – Wheelbarrow was excluded – Speed curve adjusted for modern config. – New shop configs for harvesters and electric vehicles. – Clutchpedal can be used as inching-pedal for harvesters. – Manual vehicles can now be completely deactivated. – With the CVT clutch you can now coast longer from full speed. – The clutch no longer needs an extra button shortcut, you can use the standard clutch. – Problem that threshers overheated too quickly in HST mode has been fixed. – Heating FS2 reduced – Reduced damage when changing driving ranges when FS22_RealisticDamageSystem is inactive. – Translation texts corrected – Added NL language – Memory function has been revised again, all configs should now load correctly. – Fixed swapped driving areas from the Github hotfix. – The HST and Harvester configurations no longer overwrite the CombineXP Speed reduction. – Help menu has been updated. – VCA hand throttle can only be used in HST 1, However, not full throttle, just turn it up to 99 percent! (The intervention in VCA at this point is hard) – Ramps can now be controlled directly, individually. e.g. for a VarioStick – Most custom shop categories integrated, if yours is not recognized, please let us know. – Compatibility with the Göweil DLC – Clutch value added for DBL
Saisonzelte v1.0.0.1
Saisonzelte v1.0.0.1 Im Paket sind vier Saisonzelte enthalten, drei davon sind Dekoration, eines hat eine Schlaffunktion. Jedes Zelt verändert sich im Laufe der Jahreszeiten. Preis jedes Zeltes: 2500 $ Preis für das Lagerfeuer: 100 $ Änderungsprotokoll 1.0.0.1: – Indoor-Bereiche entfernt (verursachte im Winter Probleme) – Lagerfeuer hinzugefügt HINWEIS: Zelte und Lagerfeuer verschwinden im Winter! Tags: Jedes Zelt
John Deere X9 2020 US And EU Version v1.0.0.2 – FS22
John Deere X9 2020 US And EU Version v1.0.0.2 – FS22 Changelog 1.0.0.2: – Adding opening side flaps – Repair of the moving discharge tip on the pipe – Fixes for minor issues – Added engine configuration 1000 and 1100 – price: 550.000 $ – engine power x9 1100: 690HP – capacity range 16200 – 27400 l – 4 grain tank configurations – Light configurations – demo stickers configurations – Wheel configurations – 3 European tags – More details have been added – New wheel configurations – Rear axle width configurations – And many more fixes Changelog 1.0.0.1: – Fixed fillvolume – Fixed brakes – A third pipe option has been added – The tank capacities have been improved
Kotte Manure Pack v1.0.0.1 – FS22
Kotte Manure Pack v1.0.0.1 – FS22 Changelog: 1.0.0.1 Fixed Manure Sensor on PQ32000 Kotte FRC55 Price: 33,500 $ Kapazität: 55,000 L Kotte FRC65 Price: 36,000 $ Kapazität: 65,000 L Kotte TSA 30000 2 Achs Price: 92,000 $ Kapazität: 30,000 L Kotte TSA 30000 3 Achs Price: 95,000 $ Kapazität: 30,000 L Automatische Liftachse Kotte PQ 32.000 Price: 189,500 $ Kapazität: 32,000 L Krampe Dolly 10 L Price: 9,500 $ Zunhammer Vibro Price: 62,000 $ Bomech Trac-Pack Price: 62,000 $ Bomech Multi Profi 21/15 Price: 69,500 $ Bomech Multi 4XL Price: 104,000 $ All trailers and equipment have: Various adjustments Color Changes Wheel Sets The pack is Manure System and Precision Farming Ready (Only PC) When using the Mod: Manure system, the visible decorative hoses are removed and replaced with Parking options for the manure hoses.
Ponsse Forwarder Pack v1.1.0.1 – FS22
Ponsse Forwarder Pack v1.1.0.1 – FS22 Changelog: 1.1.0.1 – Fixed failure in vehicle model – Color choice adjusted – Nokian Forest King TRS 2 Wheelset added – Steering angle adapted to original vehicle Bison Active Frame Elephant King The Elephant King has an expandable Bunk basket for significantly more loading capacity. The following shop options are available: – Motor Version – Window tint – Hood protection – Protection Down – Exhaust protection – Windshield protection – Timber blade – Tire selection, including Bands and chains Color Choices: – Main color, Claw color, Bands and chains, Rim color Price from: 225.000 $ Power from: 285 hp Changelog 1.0.1.0: – Changed Claw/wood handling, no more logcrab trigger (Automatic Hold)installed – 2. Fixed indoor camera. Note: To use, please set to change drivingdirection, otherwise the seat will be in the way – Added Position light in the Claw to better assess where you are exactly Changelog: 1.0.1.1 – Fixed incorrect “Easy Arm Control” Changelog: 1.1.0.0 – Log movement in the stake basket reduced – Special attacher for the Ponsse Alpine traction winch installed. – Bison – Wheel sets revised – Elephant King – Larger wheels and wheel sets adjusted – Crane cameras changed – Olofsfors Chains corrected – Added color choice for hose guards – Various small fixes – Original Ponsse color registered – Changes for the traction winch so that you can now control it separately – Added steering sound
Kemper Pack v1.1.0.1 – FS22
Kemper Pack v1.1.0.1 – FS22 Changelog 1.1.0.1: – Rostselmash and Lacotec frames added to all cutters – Added new colors Package includes Kemper, John Deere and New Holland cutters, grass pickup and support wheel with all available attacher configurations: – Lacotec – Claas – Krone – Fendt – John Deere – New Holland – Rostselmash 345 Plus/450 SFI: Price: 60000 $ Max. working speed: 10 km/h Required power: 375 HP Working width: 4.5 m 360 Plus/600 SFI: Price: 80000 $ Max. working speed: 10 km/h Required power: 580 HP Working width: 6 m 375 Plus/750 SFI: Price: 100000 $ Max. working speed: 10 km/h Required power: 650 HP Working width: 7.5 m 390 Plus/900 SFI: Price: 120000 $ Max. working speed: 10 km/h Required power: 750 HP Working width: 9 m 3003/639 Premium: Price: 20500 $ Max. working speed: 15 km/h Comfort support wheel: Price: 2000 $ Changelog 1.1.0.0: – Added Kemper as default brand – Added brand configurations (from now John Deere and New Holland versions can be selected in configuration) – Added color configurations – Added John Deere frame to Kemper 3003 – Removed New Holland frame from John Deere 639 Premium – New mod icon – Renamed modification – descVersion updated – Improved screenshots NOTE: If you are using a previous version of headers, you need to sell them and then update the mod!
AVANT-Series v1.7 – FS22
AVANT-Series v1.7 – FS22 Changelog 1.7.0 Fast Connector Upgrade replace: old hydraulic and electronic connector with the “Fast Connector” Changelog 1.6.0 – Mowing Update add: Flailmower 1200 add: Flailmower 1350 add: Flailmower 1500 Changelog 1.5.0 – Winter Update add: Dozer Blade 2000 add: Dozer Blade 2500 some optimization This package contains: Loader: Avant 420 – Price 16.000 $ – Built 2011 Avant 750 – Price 38.000 $ – Built 2012 Basic – Pallet fork – Hightip shovel – Hightip shovel XL – Big bag transporter Adapter – Adapter – Skidsteer – Adapter – Trailer – Adapter – 3-Point Grassland – Cutter bar 1,60 m – Collecting lawn mower 1200 – Flailmower 1200 – Flailmower 1350 – Flailmower 1500 Animal – Bale fork – Roundbale fork – Manure fork Groundwork – Cultivator Forestry – Stump Grinder – Timber grab HD Winter – Snowblower 1500 – Dozer Blade 2000 – Dozer Blade 2500
Kastrnka v2.0 – FS22
Kastrnka v2.0 – FS22 Changelog 2.0.0.0 Remodeling of the entire tractor model Added front loader configuration Added new animations (Seat suspension, Wheel covers, hoses…) Added support for interactive control (requres Interactive control Vertex Dezing is on MODHUB) Interactive control and mouse control can be configured (For consoles) Added support for precision Farming mod Added new sounds to animations Redesigned dashboard (New textures, lighting, buttons) New textures for dirt and destruction New sticker textures I would like to present to you my very first created model. I worked on it for about 2 years. That’s why it took so long because I had to learn it all. Currently, this model is ready for version 1.0. In the future, I plan to make all sorts of modifications to it in terms of appearance, sound, functionality, etc. A little about the model. It is a home-made tractor with an RS 09 engine, 16-speed gearbox and 4×4 drive. The tractor is suitable for use in the vineyard and in the field with smaller tools and for pulling smaller sidings. I hope you like my mod. Manufacturer: Lizard Engine: RS 09 Production: Homemade Transmission: Manual 16 gears Max speed: 35 km/h Configuration: Front attacher, back attacher Price: 5000 $ Power: 35HP Shop Category: Small Tractors Changelog 1.1.0.0: – Fixed rear attacher joint – Added new engine – Added color configuration – Language support: cz, en, de Hello I want to show you to update version 2.0 to my Kastrnka mod. It took longer because I redid the entire model because it had some mistakes and I wanted to improve it. At the same time, I added many interesting functions and configurations, which you can read in the changelog. At the same time, I want to say in conclusion that this is the last update (if there is no need to fix some errors) for farming simulator 22, but don’t worry, I definitely plan to put this mod in Farming simulator 25 as well. So enjoy this mod as much as you can and thank you.
FTG FB90D v1.0 – FS22
FTG FB90D v1.0 – FS22 Källefall was a company that originated from the farm Källefall outside of Tidaholm in Västergötland, Sweden. Changelog 1.0.1.0: Changed Normal textures Changed Log grabber Changed Crane lights Changed oil pump with hoses Källefall’s product has been manufactured since the early 1990s in Vilnius, Lithuania. The production company, which is now part of FTG, further developed the Källefall product in the early 2010s, and has successfully sold it throughout Europe. The TRAILER FB90D with a loading capacity of 9 tons and double beam frame Shop Category: Forestry Equipment Price: $30.000 With Z trailer unfold/fold
Gumpen Mega Field And Forest Map v1.0.0.4 – FS22
Gumpen Mega Field And Forest Map v1.0.0.4 – FS22
John Deere X9 2020 US- und EU-Version v1.0.0.2
John Deere X9 2020 US- und EU-Version v1.0.0.2 John Deere X-Serie kombiniert US- und EU-Version. Änderungsprotokoll 1.0.0.2: – Hinzufügen von zu öffnenden Seitenklappen – Reparatur der beweglichen Auslaufspitze am Rohr – Korrekturen für kleinere Probleme – Motorkonfiguration 1000 und 1100 hinzugefügt – Preis: 550.000 $ – Motorleistung x9 1100: 690 PS – Fassungsvermögen 16200 – 27400 l – 4 Korntankkonfigurationen – Lichtkonfigurationen – Demo-Aufkleberkonfigurationen – Radkonfigurationen – 3 europäische Tags – Weitere Details wurden hinzugefügt – Neue Radkonfigurationen – Hinterachsbreitenkonfigurationen – Und viele weitere Fehlerbehebungen Änderungsprotokoll 1.0.0.1: – Festes Füllvolumen – Feste Bremsen – Eine dritte Rohroption wurde hinzugefügt – Die Tankkapazitäten wurden verbessert Tags: John Deere X9PS
- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro