Farming Simulator 19 mods
54,252 results- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro
City of Herne (Germany) v1.0.0 Mod
City of Herne (Germany) v1.0.0 Mod Hi. Here is the requested City of Herne (Germany) Flag. Multiplayer support added. You will find this under placeables in Decoration after you have added this to your mod folder. If you are wanting your country flag added, Please leave comment below. Enjoy, Cheers, Cazz64 Price: $50 Daily upkeep: $1 Brand: Lizard
MAN 18500 Groenbedrijf v1.1 Mod
MAN 18500 Groenbedrijf v1.1 Mod This mod have a Belgian numberplate and the logo from Groenbedrijf. It’s edit by LanMar Team MAN TGS 18500 MultiColor Bos Power: 500 Maximum Speed: 80 Price: 130000
Ireland Flag v1.0.0.0 Mod
Ireland Flag v1.0.0.0 Mod Hi. Here is the requested Ireland Flag. Multiplayer support added. You will find this under placeables in Decoration after you have added this to your mod folder. If you are wanting your country flag added, Please leave comment below. Enjoy, Cheers, Cazz64 Price: $50 Daily upkeep: $1 Brand: Lizard
Georgia State Flag v1.0.0 Mod
Georgia State Flag v1.0.0 Mod Hi. Here is the requested Georgia State Flag. Multiplayer support added. You will find this under placeables in Decoration after you have added this to your mod folder. If you are wanting your country flag added, Please leave comment below. Enjoy, Cheers, Cazz64 Price: $50 Daily upkeep: $1 Brand: Lizard
Oklahoma Flag v1.0.0 Mod
Oklahoma Flag v1.0.0 Mod Hi. Here is the requested Oklahoma Flag. Multiplayer support added. You will find this under placeables in Decoration after you have added this to your mod folder. If you are wanting your country flag added, Please leave comment below. Enjoy, Cheers, Cazz64 Price: $50 Daily upkeep: $1 Brand: Lizard
Road pack v1.0 Mod
Road pack v1.0 Mod Hi, I have a packet of roads for you. The package contains: * straight: 10, 20, 50 m * turn: 30, 45, 60, 90 degrees
URSUS C360 v1.0.0.0 Tractor
URSUS C360 v1.0.0.0 Tractor Assumed work lamps, a rooster and a weight BETA version
URSUS C360 Puszka Beta FS19
URSUS C360 Puszka Beta FS19 URSUS C360 Puszka for Farming simulator 19 Assumed work lamps, a rooster and a weight BETA version Credits:Model: Marcello1942 FS19: Michu1998
Placeable curbs v1.0.0.0 FS19
Placeable curbs v1.0.0.0 FS19 Hello, because I had a lot of queries today I have for you curbs Placeable, which you so much ask for, I hope that they will beautify your farms greetings and pleasant use. Curbs: – Have a clean LOG – works in MP Credits:VenTuriO
URSUS C360 v1.0 FS19
URSUS C360 v1.0 FS19 Assumed work lamps, a rooster and a weight BETA version Credits:Model: Marcello1942 FS19: Michu1998
Krone Emsland Kipper v1.0 FS19
Krone Emsland Kipper v1.0 FS19 This is the Krone Emsland trailer for FS19 – multi color choice for cover, rims and main – wheels are brought – brand: Krone – volume: 20 000 l – price: 22 000 € (picture) have fun ! support me on Instagram: fs19_wallpapers Credits:ls19_wallpapers
Farm Convoy Plate v1.0.0 FS19
Farm Convoy Plate v1.0.0 FS19 Name : Farm Convoy Plate Price : 250€ This mod he be created by myself. Credits:JamesLeBavard
FENDT VARIO 700 V 1.0 FS19
FENDT VARIO 700 V 1.0 FS19 – Engine Setup: 165 hp, 200 hp, 240 hp – Frontloader Attacher – Selectable Wheels – Selectable Wheels Brand – Selectable Rim Color – Choice of Color Credits:LanMar Team
Converted Road Pack Kit From 2017 – 2019 v1.0
Converted Road Pack Kit From 2017 – 2019 v1.0 So this is a edit of the road kit I made for 2017 with the authorisation from Fatian famous road kit, made available for all to use in 2013, I made some changes to this version from Fatian’s and made this available to all to use also. So a quick edit over to 2019 with the help from FA285634 getting my head around textures, and also TSM putting up with me and also guiding me through were I had gone wrong, I now bring the 2017 road kit to FS2019. There are so many pieces within this kit, and I am sure you maybe all familiar with how it’s used, as I have already seen some new maps with the road kit inside, a simple edit to the specular will sort the glossyness out on the white lines, but take the specular out of this mod for better use. There is a new spec for the paving-road and cross junctions. Take these three speculars out and place them in your edited versions textures, and this will bring the white/chrome looking lines back to white. Anyways simple The kit is big and should have almost every piece needed to make a map road system, I am sure you will as it has been out for some time and no real big issues as far, it has already been tested by FS-UK once, but had a couple off issues that were in the 2017 version as a oversight, but these have now been addressed, so enjoy if not already converted, and good luck with your maps. I have as mentioned above made a new spec map for the Road, Junctions and paving, so they are not receiving as much light from the Sun, so no need to wear Glasses when looking at the road.
Barbed Wire Fence Kit v1.0.0.2 Mod
Barbed Wire Fence Kit v1.0.0.2 Mod This is a edit and extension of my 2017 version of the Barbed wire kit, I have added 4 varied curves from left to right and up to 45. Not that you need to make a circle but it’s there! Anyways these are really only good on level ground, so a lot of input to add these to your map if terrain is not level. So why make this kit again! a simple edit of textures and adding into 2019, didn’t really appeal to me, so remade them as a edit in Blender and brought them here today for all to share. In this kit is 5 varied posts, all having their own 1st stage wires attached, also I have made a pre made diorama of a long fence and a broken one, again prefer’d on flat land these are as pre made items are none editable, also there are 4 variants of left from 10 20 30 45, also duplicated in the right position. The aim is that all these objects are placed within a transformGroup that allows you to keep all variants together, meaning all objects have their own transformGroup and a simple duplicate of the first object is all that is needed, and then move to the designated area to set into the map. Once this duplicated version is edited, then the need to duplicate another is important, as the removal of certain objects within the first one, will reduce the random look of the fence in which I made many choices for. So once the first object is laid and objects removed, PLEASE don’t duplicate this one, as it will look so tiled. Anyways I am sure you will get used to it, but if there is a need for a Video after upload, give me a shout in the Support topic, and I will create a little vid to show how easy it is to recreate a simple fence along a bendy and bumpy road. Thanks for downloading I am currently adding the shadows to the model and going to re upload it to save everyone the hassle, Sorry for the inconvenience but I for one know this is a simple task if only a couple of items, with this being a kit and quite a few. I would suggest holding back until the new version is uploaded, Thanks again in advance and hopefully re-uploaded tomorrow. Please Don’t download this until the new version is ready It will also come with alternative wood texture for the posts. Again apologies for any inconveniences The new version is uploaded and Thanks for your patients. This is the newer version with cast and receive shadows, also has collisions and if not needed then a simple removal of the rigidbody, also inside the textures folder is a new alternative wood effect which can also be used by simply removing the original texture that is used, just gives you a little choice on wood for your maps scene. Again sorry for any inconvenience this has caused, but please enjoy and don’t hold it against me!
- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro